How to Remove SIM Card From iPhone 6 without Tool

How to Remove SIM Card From iPhone 6 without Tool

A SIM card is a necessary addition in every phone, including the iPhone 6. It makes calling and receiving data possible since the provider communicates over the SIM processors inside the phone. One thing is certain. If you want to change the SIM card, you must know how to remove it first. Sometimes, we are not equipped with the professional tool that comes with the phone. It might be lost or misplaced somewhere, but there is always some reasonable solution. If you want to know how to remove a SIM card from the iPhone 6 without a tool, keep reading.

Get the compelling alternatives.

Removing the SIM card is easier if you think about alternatives. We might not have the right tool for SIM removal, but we can make some alternative solutions. One of them is using a simple needle and paper. The needle is needed to eject the SIM card, while the additional paper is essential for overall safety. Follow these simple steps:

  1. Turn off the phone.
  2. Take a piece of paper and fold it several times to make a solid structure (It will be important for handling the needle).
  3. Take the needle and insert it down the hole next to the card tray.
  4. Pay attention to the top of the needle and place the paper so that you can protect your finger during the operation.
  5. Press the needle down the hole and do it with the folded paper so that you won’t get hurt.
  6. Once you press the metal part inside the hole, you’ll hear the click (It means the card is removed).
  7. You’ll see the top of the card tray push out, and that’s the result you want to get.

As you can see, the SIM card is easy to remove with only two things we all have at home. A small needle and a piece of paper. If someone asks you “How do you get the SIM card out of an iPhone 6 without a paper clip?”, You know the answer.  Most people use paper clips, but they are not necessary for the process. A needle can do the trick easily.

How to put a SIM card in an iPhone 6

Now when you know how to eject the SIM card from an iPhone 6, you need to know how to insert a new card. It is very simple since it requires a few simple rules. Follow the card shape and decide how to put it into the tray. You’ll see the narrow part that goes inside, so the wider area stays on top. It is easy to insert the card once you know how to recognize the narrower and the wider areas of the card trays. If you wonder where the slot is, you’ll find the slot right under the power button at the right side of the phone.

If you wonder how to put a SIM card in an iPhone 7, the process is always the same. Find the slot under the power button. Make sure that you turned off the phone so that you can insert the card. Place the card inside the tray and slide it into the slot. It is very simple, and you’ll have fun doing it. The method applies to both iPhone 6 and iPhone 7.

Final Verdict

In case that you do not have an iPhone SIM eject tool with you all the time (which most of us don’t have), you need to have some alternatives. Most people use paper clips or even the post of an earring. You can find other options like ballpoint pen tips or an eyeglass screwdriver kit. In this case, we highlight using a needle but any of the other options will work just as well.

When you have learned how to remove a SIM card from an iPhone 6 without a tool, use the knowledge and eject the card from your phone. You can change the card or use another provider. No matter the case, you know how to do the job. Remove the card with the mentioned method every time you need to replace or change sim cards. With a good needle, the process is much easier. Most phone sellers recommend using the iPhone SIM eject tool that comes with the phone package. In case that you don’t have it or lost it, alternatives like needles will be equally effective. Good luck!

Leave a Comment

Your email address will not be published.

PCB Tool Expert x